Error!
Oops something went wrong, please try again later.
Hillsides, curves, dips and rises … when a fencing project veers into tough terrain, installers can keep their fence on track with tips and strategies from Steven Sarson. With nearly 30 years of experience in the fencing industry, he’s seen it all.
“Proper installation techniques allow us to put up fence in every type of terrain,” Sarson explains.
As a Bekaert Fence Pro and Technical Support Manager, Sarson spends his days providing advice, answering questions and leading fencing demonstrations to teach farmers, ranchers and contractors installation techniques for the long run. “It’s my job to take the guesswork out of fencing,” he says.
Before purchasing wire, posts, staples and other fencing supplies, Sarson encourages installers to put pen to paper and map out their project.
“It doesn’t need to be fancy. Spending a few minutes before the project begins to identify challenging sections or establish where gates will be needed saves time and frustration.”
To ensure you have enough materials on hand for the project, Sarson encourages fencers to try out Bekaert’s online fence calculator.
This tool can help you decide what you will need for your fencing project. The calculator will show you which materials you need along with the dimensions for your fence. You can also use our Product Finder to purchase the best materials for your specific fence application.
Installing a wire fence takes preparation and care. Make sure you have what you need to install your fence over tough terrain. Consider your own natural environment before putting up a fence.
Maintaining even tension along the entire length of fence can be tricky when fencing along dips and rises.
This also prevents wires from pulling in one direction or the other.” Keep all staples loose: Loose staples are important to maintaining equal tension throughout the entire length of fence. The space between the staple and post allows for wire to expand and contract as temperatures fluctuate. And breathing room gives wire the flexibility it needs to rebound when animals push against it.
On a typical line post, Sarson recommends stapling or clipping the bottom two, every other wire and the top. “This keeps animals from pushing the top wire down or the bottom wires up,” Sarson says.
When fencing on a steep grade think perpendicular not plumb: On a steep hillside, fence posts should be driven perpendicular at a 90-degree angle to the ground.On steep grade, if the post is driven straight up and down, the low side of the post cannot be driven into the ground as deep as the high side. And wire will not be spaced equally.
“When I first learned to fence on a hillside, my mentor asked me, ‘what is the longest side of a square?’ The answer is the diagonal,’” Sarson says.
“Think of fencing on a steep grade like hanging a gate on a hillside. If your posts are plumb, the gate will gap. The same concept applies to the fence. You want your fence to follow the line of the terrain smoothly.”
Curves: Extra posts, spaced about 6-to-10-feet apart, are necessary when fencing on a curve. When driving the posts, Sarson suggests slightly leaning each post about 3-inches against the curve. Staple the wire to the outside of the curve. “If fencing a left-hand curve, lean the posts to the right, and the opposite for a right-hand curve. This keeps the wire’s tension tight against the post instead of pulling away from the post.”
Ask a Fence Pro: Need more advice for your fencing project? Reach out to Bekaert’s team of fence pros.
Find more tips, techniques and fencing best practices at Bekaert Fencing's new YouTube channel.
Download the article: Tips for Fencing over Tough Terrain
